FB39 OUT P01 : Output stage Fluid Connection

[hit  <- on your browser to return]

Network 1: Pre-Setting

#Support.Estop_TOF(IN := "DI MAIN GLB".P00.GLB_Estop,

                   PT := t#1000ms);

Network 1: Call manual operation

#MANUAL(ST_MANU := "DI MAIN GLB".P00.ManuCmpltMa_run,

        MODULE_HP := "HMI KEY".P01.GLB.F20_HomPos,

        SUPPORT_SEQ := "DI MAIN P01".M01.HomPosRun);

Network 3: G120C Product inlet pump

// Execute reference point

#G120C.DRV.MC_Power.StartMode := #G120C.DRV.MC_MoveVelocity.Direction := 1;

#G120C.DRV.MC_MoveJog.PosCntrl := TRUE;

// Halt impulse

#tmp_enable_axis := "HMI KEY".P01.G120C.F12_Enable_WP;

#G120C.DRV.Support.FEg_Halt_Imp := #G120C.DRV.Support.FEg_Halt AND NOT #tmp_enable_axis;

#G120C.DRV.Support.FEg_Halt := #tmp_enable_axis;

// Execute output stage

#G120C(ENABLE := #Support.Estop_TOF.Q,

       HALT_01 := "HMI KEY".P01.G120C.F21_Halt OR #G120C.DRV.Support.FEg_Halt_Imp OR "DI MAIN GLB".TOF_CmpltMaOFF_Pulse.Q,

       MCB := "E01 G120C MCB",

       START_VELO := #tmp_enable_axis AND (#G120C.DRV.Support.Cmd_MovAbso AND ("DI MAIN GLB".P00.AutoCmpltMa_run OR "DI MAIN P01".M01.HomPosRun OR "DI MAIN P01".SEQ1.SSM.S.stepin)

                     OR "HMI KEY".P01.G120C.F17_GoToAbsoPos),

       JOG_HP := #G120C.DRV.Support.Cmd_MovJogHP AND ("DI MAIN GLB".P00.AutoCmpltMa_run OR "DI MAIN P01".M01.HomPosRun OR "DI MAIN P01".SEQ1.SSM.S.stepin) OR #MANUAL.G120C.CmdExe_slow_fast_HP,

       JOG_WP := #G120C.DRV.Support.Cmd_MovJogWP AND ("DI MAIN GLB".P00.AutoCmpltMa_run OR "DI MAIN P01".M01.HomPosRun OR "DI MAIN P01".SEQ1.SSM.S.stepin) OR #MANUAL.G120C.CmdExe_slow_fast_WP,

       ACK_FLT := "DI MAIN GLB".P00.FLT_CmpltMaACK_REg,

       MODE := 0,

       AXIS := "+1-G120C");

Network 4: V101 Product pumpe pressure gully safety valve

#V101.LampWP := "A01 V101 WP" := "HMI KEY".P01.V101.F12_Enable_WP AND #V101.CmdExe_WP;

#V101.LampHP := NOT #V101.LampWP;

Network 5: V102 Product pre-condition CIP gully safety valve

#V102.LampWP := "A01 V102 WP" := "HMI KEY".P01.V102.F12_Enable_WP AND #V102.CmdExe_WP;

#V102.LampHP := NOT #V102.LampWP;

Network 6: V103 Product pre-condition CIP gully N.O. valve

#V103(CMD_WP := FALSE,

      FB_HP := "E01 V103 HP",

      FB_WP := "E01 V103 WP",

      RLS := "E00 AirPressur ok",

      ACK_FLT := "DI MAIN GLB".P00.FLT_CmpltMaACK_Imp,

      VALV_WP => "A01 V103 WP");

Network 7: V103 Product pre-condition CIP gully N.O. valve

#V104.LampWP := "A01 V104 WP" := "HMI KEY".P01.V104.F12_Enable_WP AND #V104.CmdExe_WP;

#V104.LampHP := NOT #V104.LampWP;

Network 8: V105 Product inlet gully valve

#V105(CMD_WP := FALSE,

      FB_HP := "E01 V105 HP",

      FB_WP := "E01 V105 WP",

      RLS := "E00 AirPressur ok",

      ACK_FLT := "DI MAIN GLB".P00.FLT_CmpltMaACK_Imp,

      VALV_WP => "A01 V105 WP");

Network 9: V106 Product inlet valve

#V106(CMD_WP := FALSE,

      FB_HP := "E01 V106 HP",

      FB_WP := "E01 V106 WP",

      RLS := "E00 AirPressur ok",

      ACK_FLT := "DI MAIN GLB".P00.FLT_CmpltMaACK_Imp,

      VALV_WP => "A01 V106 WP");

Network 10: V107 Product circulation double seat valve

#V107(CMD_WP := FALSE,

      FB_HP := "E01 V107 HP",

      FB_WP := "E01 V107 WP",

      RLS := "E00 AirPressur ok",

      ACK_FLT := "DI MAIN GLB".P00.FLT_CmpltMaACK_Imp,

      VALV_WP => "A01 V107 WP");

Network 11: V108 Product circulation seat valve above V107

"A01 V108 WP" := "HMI KEY".P01.V108.F12_Enable_WP AND #V108.CmdExe_WP;

#V108.LampHP := NOT "A01 V108 WP";

Network 12: V109 Product circulation seat valve below V107

#V109.LampWP :="A01 V109 WP" := "HMI KEY".P01.V109.F12_Enable_WP AND #V109.CmdExe_WP;

#V109.LampHP := NOT #V109.LampWP;

Network 13: V110 Water inlet double seat valve

#V110(CMD_WP := FALSE,

      FB_HP := "E01 V110 HP",

      FB_WP := "E01 V110 WP",

      RLS := "E00 AirPressur ok",

      ACK_FLT := "DI MAIN GLB".P00.FLT_CmpltMaACK_Imp,

      VALV_WP => "A01 V110 WP");

Network 14: V111 Water inlet seat valve below V110

#V111.LampWP := "A01 V111 WP" := "HMI KEY".P01.V111.F12_Enable_WP AND #V111.CmdExe_WP;

#V111.LampHP := NOT #V111.LampWP;

Network 15: PT101 Product inlet pressure (0 - 3000 mbar)

#PT101(PEW_IN := "E01 PT101 InPut":P,

       H_LIM := #PT101.Support.High_Lim,

       L_LIM := #PT101.Support.Low_Lim,

       PEW_SCALE => #PT101.Support.Out_Scale);

Network 16: FIT102 Product inlet flow (0-4800.0) l/h

#FIT102(PEW_IN := "E01 FIT102 InPut":P,

       H_LIM := #FIT102.Support.High_Lim,

       L_LIM := #FIT102.Support.Low_Lim,

       PEW_SCALE => #FIT102.Support.Out_Scale);